General information, Safety – New Era NE-9000 Series Programmable Peristaltic User Manual

Page 9

New Era Pump Systems Inc.

www.SyringePump.com

Model NE-9000

Publication #1200-04

7/28/14

General Information

Thank you for purchasing the NE-9000 Programmable Peristaltic Pump. With the NE-9000 peristaltic
pump you will be able to perform simple fluid dispensing or implement a complex automated dispensing
system.

Please familiarize yourself with the NE-9000’s operation by reading this user's manual. For future
reference, record the serial number, located on the rear of the pump, and the date of purchase.

Serial Number ____________________, Date of Purchase ___________________________,

This Operating Manual, and the NE-9000’s hardware, electronics and firmware are copyrighted.

1.1

Safety

In the interests of safety, this pump and the tubing selected should only be installed and used by
competent, suitably trained personnel after they have read and understood this manual, and considered any
hazards involved.

Markings & Symbols

The following are the meanings of the markings and symbols used in these Safety Precautions.

Warning

This symbol indicates information that, if ignored or applied incorrectly, creates

the possibility of death or serious personal injury. i.e. fire, explosion.

Caution

This symbol indicates information that, if ignored or applied incorrectly,

possibility of minor or moderate personal injury or property damage.

Warning

• Read the user’s manual
• This product is designed for liquid only.
• User is responsible to determine the suitability of the pump to its desired function.
• Verify that tubing is appropriate for liquid being pumped.
• Disconnect power from the pump when replacing tubing or connecting or disconnecting cables.
• Never leave any dangerous liquid inside of tubing when replacing tubing and disposing pump. Remaining

liquid may cause serious injury.

• Never use in atmosphere with flammable gas.
• Never use in any location where there is a possibility of high humidity, high temperature, or extreme dust.
• Use only with the supplied power supply connected to a power source as specified on the power supply

label.

• Never use a voltage that is different from voltage specified in this manual. Unless Authorized by NEW

ERA PUMP SYSTEMS INC.

• Do not operate with any foreign matter (water, dirt, metal or other materials) inside the Pump-head.
• Do not push objects of any kind into the chassis openings, except for appropriate cables and connectors.
• Never try to take the unit apart or modify it except as described in this manual or authorized by NEW

ERA PUMP SYSTEMS INC.. No user serviceable parts inside.

• Do not immerse the pump in liquid. If spilling occurs unplug pump immediately.
• Install on a stable surface.
• The pump can automatically start when the Pumping Program is operating or when attached to an

external control device.

• Prevent liquids from entering openings in the rear of the pump.
• If the pump becomes damaged, do not use unless certified safe by a qualified technician. Damage

includes, but is not excluded to, frayed cords and deterioration in performance.