Multiquip DCA20SPXU4F - Manual (Page 34)

page 34 — dca20SpXU4F Servpro™ • operation and partS manUal — rev. #0 (07/16/14)
15. Place the main, gFci, and aux. circuit breakers in the
on position (Figure 39).
Figure 39. Main, Aux. and GFCI
Circuit Breakers (ON)
16. Observe the generator’s ammeter (Figure 40) and
verify it reads the anticipated amount of current with
respect to the load. The ammeter will only display a
current reading if a load is in use.
Figure 40. Ammeter (Load)
17. The generator will run until manually stopped or an
abnormal condition occurs.
GeNeratOr start-Up prOCeDUre (MaNUaL MODe)