Ac ammeter gauge reading – Multiquip DCA20SPXU4F User Manual

Page 26

page 26 — dca20SpXU4F Servpro™ • operation and partS manUal — rev. #0 (07/16/14)

aC aMMeter GaUGe reaDiNG

HoW to read tHe ac ammeter gaUge

The AC ammeter gauge is controlled by the AC ammeter

change-over switch.

This switch is located on the control panel and

does not

effect the generator output. It is provided to help observe

how much power is being supplied, produced at the UVO

terminal lugs.

AC Ammeter Gauge Reading

Place the

AC Ammeter Change-Over Switch (Figure 13)

in the U position and observe the current reading (load

drain) on the U terminal as indicated on the

AC Ammeter

Gauge . This process can be repeated for terminal V.

Figure 13. Current Reading (Load Drain)

NOTICE

The

ammeter gauge will only show a reading when

the

Output Terminal Lugs are connected to a load

and is in use.