MK Diamond MK-2005G - Manual (Page 53)

MK-2005G Revision 12/00, Effective Date December 26, 2000 Page 53
EXPLODED VIEW AND PARTS LIST
1. Remove P#155494(5/16-18x2 screw), P#156961(upper shock mount), and
#151053(fender washer) at location A.
2. Attach support arm(itme3) to engine guard(item 1) with items 9, 10, 11, and 12. Fasten
the screw and nut loosely.
3. Fit engine guard onto the engine upper mounting plate.
Meanwhile, Screw item 8 through items 5 and 6 into the threaded hole on the side of the
engine. Do not tighten the screw.
4. Install item 4, 5 and 6 through engine guard and engine upper mounting plate. Fasten
the screw and nut loosely.
5. Reinstall items removed listed in step 1.
6. Secure all fasteners after placing engine guard in correct position.
**Note: Drilling two 11/32 dia. holes in engine upper mount (item2) are required on all old
style upper mounts.