MK Diamond MK-2005G - Manual (Page 43)

MK-2005G Revision 12/00, Effective Date December 26, 2000 Page 43
MAINTENANCE AND TROUBLESHOOTING
II. Engine Side V-belt:
(V)
Locate Water Pump Pivot Plate
Loosen retaining bolts
(X)
Install the Blade Guard
Adjustment Bar
(W)
Relocate Water Pump Pivot
Plate and retighten
retaining bolts
(Y)
Install the Diamond Blade
(C)
Check Belt for proper tension
If tension correct, go to step O
(proper tension 1/8-inch)
(B)
Inspect the V-belt for cracks,
fraying, separation and wear. Go
to step D if replacement required
(A)
Remove the Belt Guard
Retaining Bolts
(D)
Loosen engine mounting plate
If re-tensioning, go to step J
(F)
Push the Engine Mounting Plate
toward the front of the unit to
loosen the V-belt
(E)
Loosen Engine Adjustment
Strap Lock-nut then loosen
the Engine Adjustment Strap
Retaining Bolts Retaining Bolts
9/16-inch
Wrench
9/16-inch
Wrench
9/16–inch
Wrench
Turn counter-
clockwise to
loosen
Install Blade
Retaining Bolts Turn counter-
clockwise to
loosen
1/2-inch
Wrench
V-belt Check Tension
1/2-way
between pulleys
1/2-inch
Wrench
Turn counter-
clockwise to
loosen
1/2-inch
Wrench
Turn counter-
clockwise to
loosen Direction of Push