MK Diamond MK-2005G - Manual (Page 35)

MK-2005G Revision 12/00, Effective Date December 26, 2000 Page 35
MAINTENANCE AND TROUBLESHOOTING
12. Checking Oil Level:
NOTES: 1. Engine Oil Capacity is 0.63 US qt (0.6 l).
2. When installing the Oil Dipstick, ensure the threads are aligned with the threads of the Oil
Reservoir so as not to “cross-thread."
1/2-way up Dipstick
Bottom of Dipstick
(D)
Fill Oil Reservoir
(C)
Check Oil Level
If level is normal go to step F
(B)
Remove Dipstick
(A)
Level Cutting Head
(F)
Install the Dipstick
(E)
Add Oil until level reaches
The bottom edge of fill hole
(G)
Clean Up
Cutting Head
Loosen Locking
Handle to adjust
Cutting Head Dipstick
Turn counter-
clockwise to
loosen
Fill through
Reservoir fill hole
Wipe up excess oil
Bottom Edge Turn clockwise
to tighten
Dipstick