MK Diamond MKDX Profile Milling Machine User Manual

Page 22

Text mode
Original mode

MKDX

INSPECTION & START-UP

WATER TANK FILLING

1. Open water tank by pulling down handle (Figure 20).
2. Ensure drain plug is tightly in place (Figure 21).
3. Pour clean water into the machine’s tank until water line reaches the water hose fitting (Figure 22).
4. Do not let water fill past filter (Figure 23).
5. After filling tank, plug in water pump (Figure 24).

Fig. 20 Open Water Tank

Fig. 21 Inspect Drain Plug

Fig. 24 Plug in water pump

Fig. 23 Add clean water

FILTER

Fig. 22 Do not fill past here

WATER

HOSE

FITTING