MK Diamond MKDX Profile Milling Machine - Manual (Page 20)

20
MKDX INSPECTION & START-UP
WORKSTATION
DANGER
The MKDX is designed for on-sight fabrication. Operator should be familiar with all operations of the
machine prior to use and should read this Owner’s Manual before use.
While the machine is running, NEVER reach into the shaping zone.
• During operation, the operator should stand in front of the machine.
• When shaping, one hand should be holding the back handle and the other hand should grip
the front vertical handle of the material slide (Figure 14).
Fig. 14 Safety in the Workstation