MK Diamond MK-770 EXP - Manual (Page 18)

(A)
Place Water Pump in
Water Pan
(B)
Place Water Pump Clamp
as shown, lining the holes.
(C)
Secure Clamp with 1/4-20
wing screws and nuts.
18
SETUP, ADJUSTMENT & OPERATION
3. Water Pump Setup for Operation:
The Water Pump can be setup for operation in two ways: external Water Source or Re-circulation.
NOTE: If using a dry blade for operation, DO NOT connect the water pump.
I. External Water Source:
(A)
Remove the Drain plug
(C)
Fill the external container until
water completely covers the
Water Pump suction
(B)
Place the Water Pump
In an external container
This is the preferred method of cooling
II. Re-circulation:
NOTE: When using the re-circulation method, the water should be changed often for longer pump life
(A)
Ensure the Drain Plug is
installed in the Water Pan
(C)
Fill the Water Pan until water
completely covers the Water
Pump suction
(B)
Place the Water Pump in the
back of the Water Pan