MK Diamond MK-770 EXP - Manual (Page 11)

11
SAFETY
PRODUCT SPECIFICATIONS
The MK-770 EXP is a versatile Tile Saw. Operated and used according to this manual, the MK-770 EXP will
provide years of dependable service.
General Description
Motor Specifications
Blade Capacity:
Tile Types:
The MK-770 EXP Tile Saw is engineered as a tabletop or stand mounted wet tile saw. The saw includes a
powerful 115V electric motor. The saw is capable of cutting tile up to twenty (20) inches in length. The saw can
cut an object one and one-half (1-1/2) inches thick in one pass.
Motor specifications for the MK-770 EXP are listed in Table 2 below.
Voltage 115V
Overall Amperage 7.4 A
Frequency 60Hz
RPM 6000 rpm
Horse Power 1-1/4 hp
Table 2
The MK-770 EXP uses a 7 (7) inch (178mm) diameter, wet cutting continuous rim, MK Diamond blade with a
five-eighths (5/8) inch (15.875 mm) arbor.
The MK-770 EXP can cut a variety of tile types including stone, masonry, and lapidary products.
NOTE: The MK-770 EXP is not designed to cut plastic or metals.