Memmert HCP 246 Humidity Chambers (Generation 2003) - Manual (Page 25)

HCP page 25
11 Basic oven settings (Setup)
In this operating mode it is possible to make the basic settings of the oven. Clock time, date, day, year, and
settings of sounder, of address assignment, monitoring units, heater power and calibration are set here.
The following parameters can be selected by turning the push/turn control, and altered as described in the
section 6:
Clock time in 24-hour format
The winter/summer time changeover does not take place automatically
but must be set manually by the user.
Date
The controller incorporates a calendar which automatically allows for the
different lengths of the months and also for leap years.
Weekday
Tu
Year
Adjustment range: from 2000 to 2100
Audible signal at programme end
ENDSOUND
Setting: OFF or ON
Audible signal on alarm, e.g. overtemperature, open door
ALARM SOund
Setting: OFF or ON
Communication address
Range: 0 to 15
(see section 18)
Tolerance margin ASF
Range: 2 to 20
(see section 12.2.4)
Language
Settings: GERMAN, English, franCAIS, ESPANOL and italIANO
PRINT SETUP