Loadstar Sensors DS-3000 Digital Load Cell Display & Controller User Manual

Page 45

DS-3000U

DS3000 User Guide

Loadstar Sensors, Inc.

Page: 45 / 48

033-01419 Rev. 4

RS1©

RS2©

RS3©

RS4©

Remove sensor 1 from displayed sum.

Remove sensor 2 from displayed sum.

Remove sensor 3 from displayed sum.

Remove sensor 4 from displayed sum.

Summary:

Determine which input sensors are summed in the current display.

11.15 MODEL©

Function:

Returns model number of connected device

Keystrokes:

This command returns the current model number of the device connected to this
virtual serial interface.

MODEL

Request the model of the currently attached device to this

virtual COM port.

Summary:

Returns DS3000

11.16 UNIT© (Future Command, Not yet implemented)

Function:

Sets currently active display units

Keystrokes:

This command sets the currently selected weight unit.

UNIT MLB

UNIT N

UNIT KG

Set UNITS to Milli-pounds.

Set UNITS to Newtons

Set UNITS to Kilograms

Summary:

Remotely sets current measurement units

Function:

Returns current configuration settings

Keystrokes:

This command returns the current system configuration and programming
settings.

SETTINGS

Summary:

Returns current configuration settings:

settings

DS3000 Settings V3.05