Loadstar Sensors SC-1200 User Manual

Loadstar Sensors Equipment

Text mode
Original mode

SC-1200 Quick Start Guide

SC----1200 Quick Start Guide

1200 Quick Start Guide

Install LoadVUE first. This will install the drivers needed.

(You can also download the drivers from

http://www.ftdichip.com/Drivers/CDM/CDM20814_Setup.exe

Simply download the .exe file and double-click to run it). This location might
have changed since this document was created. If you have problems
downloading, please check

http://www.ftdichip.com/Drivers/VCP.htm

Plug all the load cells to SC-1200’s sensor ports. (The picture shows 9).

Plug in the power supply module to DC-IN and power up. Verify SC-1200’s
Green LEDs are on.