Loadstar Sensors DS-3000 Digital Load Cell Display & Controller User Manual

Page 44

DS-3000U

DS3000 User Guide

Loadstar Sensors, Inc.

Page: 44 / 48

033-01419 Rev. 4

R2TP2T TA©

Set Relay 2, Trigger Point2 to “Trigger Above.”

Summary:

Remotely set Trigger Type for each programmable set-point.

11.12 RnSx© (Future Command, Not yet implemented)

Function:

Sets sensor x relationship to Relay n

Keystrokes:

This command sets which sensors are associated with which relays. For
example, Relay one may be used with one sensor, and Relay two may be used
with a pair of others. Options are SUM “S”(Relay n reacts to the SUM of all
associated inputs), INDIVIDUAL “I”, (Relay n reacts only to this individual
sensor),or NONE “N” (this relay does not respond to this sensor)

R1S1 S ©

R1S2 S©

R1S3 N©

R1S4 N©

R2S1 S©

R2S2 S©

R2S3 S©

R2S4 S©

Set Relay 1 trigger points to sum with sensor 1

Set Relay 1 trigger points to sum with sensor 2

Set Relay 1 trigger points to ignore sensor 3

Set Relay 1 trigger points to ignore sensor 4

Set Relay 2 trigger points to sum with sensor 1

Set Relay 2 trigger points to sum with sensor 2

Set Relay 2 trigger points to sum with sensor 3

Set Relay 2 trigger points to sum with sensor 4

Summary:

Set which sensor is used to determine the threshold conditions

11.13 RnD© (Future Command, Not yet Implemented)

Function:

Relay n duration

Keystrokes:

This command sets the duration of the output contact, once a trigger condition is
detected. The duration is in seconds, and 0.0 seconds = continuous. Default is
continuous.

R1D 0.0 ©

R2D 0.0©

Set Relay1 duration to continuous.

Set Relay2 duration to continuous.

Summary:

Set output contact duration.

Function:

Adds or Removes sensor from current display sum

Keystrokes:

Add or Remove Sensor x sum from the current display.

AS1 ©

AS2©

AS3©

AS4©

Display sum includes sensor 1

Display sum includes sensor 2

Display sum includes sensor 3

Display sum includes sensor 4