11 r, Ds-3000, Emotely – Loadstar Sensors DS-3000 Digital Load Cell Display & Controller User Manual
Page 41: Rogramming the
DS-3000U
DS3000 User Guide
Loadstar Sensors, Inc.
Page: 41 / 48
033-01419 Rev. 4
11 R
EMOTELY
P
ROGRAMMING THE
DS-3000
It is planned for nearly every command to be programmed into the DS-3000U remotely. The variable “n”
corresponds to relay 1 or 2, and the variable “x” corresponds to a port 1 – 4. In the commands which follow,
the “n” and “x” should be replaced with the correct relay/port information.
PC Control Command Overview
11.1 o0W0, o0W1, o0X1©
Function:
Output Weight Commands
Keystrokes:
Output Weight commands return the currently displayed weight on the DS-
3000U to the host PC. If the displayed weight is modified by DS3000
programming to exclude some sensor inputs- that modified value is returned by
default. o0X1 will output all sensors, regardless of programming settings.
o0W0
©
o0W1
©
o0X1
©
Output gross weight continuously in the currently selected units.
Output gross weight once in the currently selected units.
Output all sensors individually, including the sum
Summary:
Output current gross weight to host PC. These outputs are read-only values.
11.2 SLC©
Function:
Show Load Capacity
Summary:
Normally the DS-3000 automatically calculates the load capacity, based on the
load capacity of connected sensors. For example, the load capacity of a single
sensor, is the load capacity of that sensor. The load capacity of two sensors, is
the sum of the load-capacities of each. In general, the SLC command returns
the sum of the load capacities of all connected sensors. This is a read only
value.
11.3 CS0, CS1, SS0, SS1
Function:
User Strings
Keystrokes:
These commands set and read user programmable text strings. String CS0 Is
typically used for the DS-3000 Serial Number, and CS1 is used for an easy to
remember text name used to differentiate this DS-3000 from others that may be
present in your system.
CS0 12345
©
CS1 BOX1
©
SS0
©
SS1
©
Program Serial Number to 12345
Program Device Name to BOX1.
Display current Serial Number
Display current Device Name
Summary:
Set and read user programmable text strings.