4 introduction, Introduction, Cam designer basic – Lenze Cam Designer Basic User Manual
Page 9: 4introduction
L
2.1 EN - 09/2005
9
Cam Designer Basic
Introduction
4
Introduction
»Cam Designer Basic« is a graphic tool for the easy creation of electronic cams.
»Cam Designer Basic« provides the features of the »Cam Designer Professional« in reduced
form.
Main features of the »Cam Designer Basic«
Easy creation of cams by means of graphic objects (e.g. lines, polynomials).
Data is directly input using the physical unit.
Display of speed, acceleration torque and jerk.
Printing of the cam graphics with project information and date.
Main features of the Software Package - Cam
48 profiles can be stored in the PLC
289 base points per profile in the relative data model
116 base points per profile the absolute data model
Increased number of the available base points with reduced number of profiles re-
served
48 cam groups can be stored
Three tracks per cam group
Four cams per tracks
Main features of the 9300EK servo cam
8 profiles can be stored in the PLC
256 base points per profile in the relative data model
64 base points per profile the absolute data model
The »Cam Designer Basic« is a product of the Software Package - Cam. It manages the rel-
evant data of the machine and also creates projects. However, it lacks the »Cam Manager«
and hence the ability of managing several products at the same time.
Note!
No names are used for profiles and projects in the documentation. The examples
use the names assigned by the system. You can assign names on your own in
your system.