Lenze Cam Designer Basic - Manual (Page 37)

L
2.1 EN - 09/2005 37
Cam Designer Basic
Operation
Saving the project
3. Click the Start Download button to start the data transfer.
Note: If you have not yet assigned a drive to one of the slaves the Drive selection
dialog box opens automatically.
• Double-click the drive to be assigned to the slave in the DriveServer tree:
• Click OK to confirm your selection and repeat the assignment for other slaves, if
necessary.
6.5 Saving the project

Click the icon or select FileSave to save the project.

Tip!
Save your project at regular intervals to protect your data against power failures or
system problems.
If you want to create a backup project on another data carrier or in another direc-
tory use the command FileSave as... instead.
Saving a project under another name
6.6 Saving a project under another name

How to save an open project under another name...
1. Select FileSave as... to open the Save as dialog box.
2. Go to the Save as list field and select the directory in which you want to store the
project.
3. Enter a name for the new project in the File name input field.

Note!
If you open several project simultaneously in the »Cam Designer Basic«, this
function refers to the project in the active window.

Note!
If you open several project simultaneously in the »Cam Designer Basic«, this
function refers to the project in the active window.