Lenze Backup & Restore Data saving and restoring - Manual (Page 27)

Lenze · Backup & Restore · Software Manual · DMS 1.3 EN · 04/2014 · TD17
27
4 Creating a backup & carrying out recovery
4.1 Creating a backup
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.1.4 Alternative: Windows Explorer - on "Directory/file" level

Tip!
In case no (executable) controller is available, or if the controller does not start in a faultless
manner, the »Backup & Restore« functions can be executed via an Explorer (like for
example the Windows Explorer).
Only create a backup if the controller is executable.

How to carry out a backup using the Windows Explorer:
1. Insert a USB stick into an Engineering PC.
2. Start an Explorer.
3. Change to the directory: \Backup\Copy_Backup_file
Copy the Backup.xml file.
4. Store this file one folder higher: \Backup
Note: If there is a Restore.xml file in this directory it has to be deleted.
5. Applies to 3200 C/p500 controllers: Copy the menu.lst file from the
stick>:\Backup\Copy_Backup_file directory to the root directory of the USB stick.
:\
6. Connect the USB stick to the controller of which you want to create a backup.
7. Restart controller (with connected USB stick) by mains switching.
• Contollers in Windows CE systems are automatically restarted.
• The backup data are saved to the \Backup subdirectory on the USB stick after successful
write operation.
8. After the boot-up of the controller: Remove the USB stick from the controller.

Note!
For carrying out a backup with the Windows Explorer only USB sticks which have
previously been used for a »Backup & Restore« can be used.