Lenze Backup & Restore Data saving and restoring - Manual (Page 26)

4 Creating a backup & carrying out recovery
4.1 Creating a backup
26
Lenze · Backup & Restore · Software Manual · DMS 1.3 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

How to carry out a backup using the »WebConfig«:
1. Connect a USB stick to the controller.
2. Start the »WebConfig«.
3. Navigate to the Backup Restore menu button.
4. Select the Backup menu item.
5. Select the Backup main action in the display area.
6. Assign the desired backup name in the input field.
Further information:  Components of the backup designation ( 22)
7. Select the Start Backup action and confirm your selection with the Accept button.
• The control file is written to the USB stick.
• The controller restarts.
• The backup is written to the USB stick.
8. Remove the USB stick from the controller.