Lenze Backup & Restore Data saving and restoring - Manual (Page 20)

3 Basic concept
3.5 Signalling of the processing state
20
Lenze · Backup & Restore · Software Manual · DMS 1.3 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.5 Signalling of the processing state
When an error occurs it is signalled via the Error LED on the controller and a text message on the
screen.
Signal transmitter Description
Status LEDs on the controller The controllers are equipped with status LEDs that show the current
operating status.
• When a backup, restore, or update is carried out, the Error and Status 1
LEDs signal the processing progress or a possible error status.
• On an optionally connected panel (screen) texts showing status and error
messages can be read.
 Status LEDs of the controllers ( 34)
»Backup & Restore«
Software application
The »Backup & Restore« application provides status information in the form
of dialog windows.
• On an optionally connected panel (screen) texts showing status and error
messages can be read.
• When an update is carried out (only available for the control technology),
status messages are written. The status messages can be viewed via the
logbook function of the »WebConfig«.
»WebConfig« The »WebConfig« signals the respective status by outputting a text in the
corresponding code: