2 creating a backup: directly on the controller, 4creating a backup & carrying out recovery – Lenze Backup & Restore Data saving and restoring User Manual
Page 24

4
Creating a backup & carrying out recovery
4.1
Creating a backup
24
Lenze · Backup & Restore · Software Manual · DMS 1.3 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.1.2
Creating a backup: Directly on the controller
[4-2]
Illustration example: »Backup & Restore« under Windows CE ()
How to carry out a backup:
1. Connect the USB stick to the USB interface of the controller.
2. Start »Backup & Restore« on the controller.
3. Select the Backup tab.
4. Assign backup name in the input field (length: 2-16 characters)
Further information:
Components of the backup designation
5. Press Start.
»Backup & Restore« writes the control file to the USB stick.
6. Restart controller (with connected USB stick) by mains switching.
• Contollers in Windows CE systems are automatically restarted.
• The backup data are saved to the \Backup subdirectory on the USB stick after successful
write operation.
7. After the boot-up of the controller: Remove the USB stick from the controller.
Note!
Cabinet controllers with a DVI interface require an external Monitor Panel.