Lenze PLC Designer PLC Designer (R2-x) CANopen for Runtime Systems - Manual (Page 45)

L-force | PLC Designer - CANopen for Runtime Systems
CAN network variables
44 DMS 2.0 EN 05/2009 TD29

4.1.3 Settings in the Global Variables Lists
Add a new global variables list (command 'Add Object’). The ‘Properties’ dialog will open automatically
(also accessible via command ‘Object Properties…’). Here you define the variables, which you want to
exchange with the other PLCs. Use the to open the following dialog:
Click on the button Add Network to get the options for defining the network properties of the current
variables list. If you have set up several network connections, then you can configure several
connections for each Global variable list.