Lenze 8210 series - Manual (Page 13)

Technical Data
UONu_^MPMQ 3-3
L
8214 8213 8212 8211 Type 150 % overload
EVF8214-E EVF8213-E EVF8212-E EVF8211-E Order no.
Motor voltage 3) V
motor
[V] 0 - 3 × V
mains
/ 0Hz ¼ 50Hz, if required up to 480Hz
Power loss (operation with I
Nx
) P
loss
[W] 55 75 90 100
Power reduction [%/K]
[%/m]
40 °C < T
amb
< 50 °C: 2.5%/K
1000 m a.m.s.l < h ≤ 4000 m a.m.s.l: 5%/1000 m
Field
f
Resolution Absolute 0.02 Hz Field
frequency Digital setpoint
selection
Accuracy 0.05 Hz
Analog setpoint
l ti
Linearity 0.5 % (max. selected signal level: 5 V or 10 V) Analog setpoint
selection
Temperature
sensitivity
0 ¼ 40 °C: +0.4 %
Offset 0 %
Weight m [kg] 2.2 2.2 2.2 2.2
Printed in bold Data for the operation with factory setting and a chopper frequency of 8 kHz.
1) This power can be additionally obtained when operating a matching motor
2) The currents apply to a periodical load cycle with 1 minute overcurrent with the current mentioned here
and 2 minutes base load with 75% I
Nx
.
3) With mains choke/mains filter: max. output voltage = approx. 96 % of the mains voltage
* Chopper frequency of the inverter
Show/Hide Bookmarks