9 parameter reference, Parameter reference, 9parameter reference – Lenze EMF2180IB User Manual
Page 53

Lenze · EMF2180IB communication module (EthernetCAN) · Communication Manual · DMS 5.0 EN · 07/2014 · TD17
53
9
Parameter reference
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
9
Parameter reference
This chapter lists all parameters of the communication module in numerically ascending order.
C0002
C0093
C0099
Parameter | Name:
C0002 | Load default setting
Data type: INTEGER_32
Index: 24573 = 0x5FFD
C0002 shows the status of the device command executed last.
can be used to enquire the current status of
the device control.
Selection list
(Lenze setting printed in bold)
Info
0 Load Def.
Load Lenze standard setting
• Only possible with controller inhibit and stopped user
program.
1 Load PS
Load parameter set
• The parameter set stored in the memory module is
loaded.
• Only possible with controller inhibit and stopped user
program.
Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C0093 | Device type
Data type: INTEGER_32
Index: 24482 = 0x5FA2
The display for the EMF2180IB communication module is "2180 0000".
Display range
(min. value | unit | max. value)
-214748
214748
Read access Write access CINH PLC STOP No transfer
Scaling factor: 10000
Parameter | Name:
C0099 | Software version
Data type: INTEGER_32
Index: 24476 = 0x5F9C
Display "x.y"
(x: major version, y: index)
Display range
(min. value | unit | max. value)
0.0
100.0
Read access Write access CINH PLC STOP No transfer
Scaling factor: 10000