Leica Biosystems RM2265 - Manual (Page 55)

53 Leica RM2265
6. Optional Accessories
1
3
2
3
5
1
4
2
6.2.6 Specimen holders
The specimen holders are especially intended
for small specimens. They are available in two
models: as an EM flat specimen holder ( Fig. 41 , 4)
and an EM universal specimen holder ( Fig. 40 , 1).
You can insert either specimen holder into the
segment arc or the specimen holder fixture.
Clamping the specimens
• Insert the special key (2) into the clamping
screw (3) of the specimen holder and open
the clamping chucks of the specimen holder
by turning the special wrench.
• Insert the specimen.
• Clamp the specimen by turning the special
wrench.
6.2.7 Specimen holder fixture
The specimen holder fixture (1) is inserted into
the dovetail fixture in the same way as a speci-
men clamp.
• Open the knurled screw (2) by turning it coun-
terclockwise.
• Insert the pin (3) of the specimen holder (4)
into the hole (5).
• Turn the knurled screw (2) clockwise to clamp
the specimen holder.
If the backlighting illumination is
used, ensure that the clamping screw
is pointing up.
Fig. 38
Fig. 39