Leica Biosystems RM2265 - Manual (Page 49)

47 Leica RM2265
Assembly of the super mega-cassette clamp
The super mega cassette clamp should preferably be used with the rigid
fixture for specimen clamps.
To do so, proceed as follows:
6.1.5 Super mega-cassette clamp
Fig. 31
1
2
3 4
5
6. Optional Accessories
If the directional fixture for specimen clamps is used with the rigid knife holder base,
the orientation must be in position "0" and the cover for backlighting illumination must
be detached. (Danger of collision if not observed!)
NEVER use the super mega-cassette clamp with backlighting illumination!
• Screw the rigid fixture for specimen clamps (4) onto the specimen
head (3):
Remove the screw (1), place the specimen holder fixture (4) onto the
specimen head (3) from the front and tighten the screws (2) with an Allen
key No. 3.
Next, insert the screw (1) from the side and briefly tighten it with an Allen
key No. 4.
• Insert the super mega-cassette clamp from the side on the left into the
dovetail guide of the rigid fixture for specimen clamps and tighten screw (1).
Remove the rubber ring (5) only after having attached the cassette
clamp on the specimen head!