Leica Biosystems CM1860/CM1860 UV - Manual (Page 43)

43 Leica CM1860/CM1860UV – Cryostat
7. Daily Use of the Instrument
10
9
8
6 7
Assembling the anti-roll guide system/replacing the anti-roll plate
1. Insert the glass into the interchangeable frame
and tighten it evenly using the knurled screws (7).
2. Insert the shaft (8) of the metal frame for ex-
changeable glass inserts from above into the
bore of the swinging arm (6) in such a way that
the pin rests in the notch.
3. Push the white plastic plate (9) from below
onto the shaft (8).
4. Screw the knurled nut (10) from below onto
the shaft (8).
All 4 lengths of the anti-roll guide glass
can be used.
7.3.2 Blade holder CE-TC
The blade holder CE-TC is designed only for dis-
posable carbide metal blades (tungsten carbide
- TC65).
The handling of this holder is identical to that of
the blade holder CE.
Fig. 38
Fig. 39