Setting up the instrument – Leica Biosystems CM1860/CM1860 UV User Manual

Page 19

Leica CM1860/CM1860UV – Cryostat

When the instrument is delivered, check the tilt indicators on the

packaging.

If the arrowhead is blue, the shipment was transported laying flat,

was tilted at too great an angle or fell over during transport.

Note this on the shipping documents and check the shipment for

possible damage.

Fig. 4

4.2 Unpacking instructions for the cryostat CM1860/1860UV

Setting up the Instrument

• Lift the outer carton ring (2) upwards and out.
• Remove the foam transport anchors (3), and then pull the dust

cover from the instrument.

• Remove all accessories (4).

Caution when

removing the

metal strips!

There is a risk

of injury when

opening them

(the strip has

s h a r p e d g e s

and is under

tension)!

To remove the metal strips (1), you

need metal shears and suitable gloves.

Stand next to the crate and cut the

strips at the location shown (see

Fig. 2a "



").



Fig. 4a

Fig. 4b