Landoll 6230 Disc - Manual (Page 74)

4-6 F-440-0113 Edition
OPERATION AND MAINTENANCE
5. To fold/unfold the disc, find a level area large enough
to accommodate the disc when it is fully unfolded.
The tractor should be stopped and not moving with
the unit fully raised. Remove the transport lock pins
from the mounts and install them in the storage
locations (See Figures 4-5 and 4-6).
IMPORTANT
Failure to remove the lock pins when unfolding will
result in serious damage to the implement. Be sure
other people and pets are a safe distance away.
6. Slowly engage the tractor lever and fold/unfold the
wing frames. When the wings are unfolded, continue
holding the tractor lever to fully extend all fold
cylinders. This will allow the wings to fully flex in the
field.
7. When the unit is fully folded, remove the transport
lock pins from the storage location and install in the
mounts provided on each side of the machine.
Figure 4-5: Installed Position of Transport Locks
Figure 4-6: Stored Position of Transport Locks
3/16 HAIR PIN
WING STABILIZER
BRACKET
1/4 X 3 ROLL PIN
WING LOCK PIN
6230foldlock1
3/16 HAIR PIN
WING STABILIZER
BRACKET
1/4 X 3 ROLL PIN
WING LOCK PIN
6230foldlock2