Landoll 6230 Disc - Manual (Page 62)

3-36 F-440-0113 Edition
ASSEMBLY INSTRUCTIONS
Figure 3-27: Rear Tow Hitch Installation
Rear Tow Hitch (Option)
1. Attach the rear tow hitch assembly to the rear bar of
the center frame using rear tow hitch clamp plates,
5/8-11 x 6-1/2 hex head cap screws, and hex lock
nuts (See Figure 3-27.) The tow hitch should be
centered on the back bar of the frame.
2. Attach coupler mount bracket to the left side of the
rear tow hitch plate using 1/2-13 x 1-1/4 hex head
cap screws and hex lock nuts (See Figure 3-28.)
3. Pull tandem adapter harness through coupler mount
bracket and attach with 5/16-18 x 1 hex head cap
screws and hex lock nuts.
4. Connect female couplers, coupler dust plugs, 3/8 x
318 hose assemblies, and male couplers. Attach
hose assemblies between coupler mount bracket
and coupler plate using 3/8-16 x 2-1/2 hex head cap
screws and hex lock nuts.
5. Connect tandem adapter harness to the main
warning light harness and the enhanced lighting
module.
6. The hydraulic hoses will route along the left side of
the rear tow hitch, over the top of the back frame
tube on the disc and then follow the rest of the hoses
and hose loops to the front of the disc so they can
plug directly into the tractor.
rear hitch assy
REAR TOW HITCH
CLAMP PLATE
REAR TOW HITCH
PLATE
REAR TOW HITCH
ASSEMBLY
5/8-11 X 6-1/2 HEX
HEAD CAP SCREW
5/8-11 HEX LOCK
NUT