Koolance RM2-4U - Manual (Page 47)

42 Filling & Maintenance
Cut a small corner in the coolant pack, and slowly
fill the reservoir. You will probably not need the
entire amount of liquid.
WARNING : The liquid coolant is electrically conductive. Use caution
when filling the system, and keep all liquids away from computer
hardware and power cables. In case of emergency during installation,
immediately unplug the computer’s rear power cable. Dry the system
thoroughly before proceeding.
!
The reservoir should be filled up to the “Refill”
indicator arrow.
Replace the refill tap screw, and stand the system back
upright. When filtration has ended (usually after about
1-5 minutes), the liquid noise will stop.