Koolance LGA 775 Adapter - Manual

The LGA 775 Adapter is designed for Intel LGA
775 (“Socket T”) processors. The motherboard
should be removed from the chassis in order to
install this device.
LGA 775 Adapter Installation v 1.1
LGA 775 boards have 4 mounting holes which the
Adapter will use.
The adapter can be mounted in any direction, but
it will be easier to install the CPU if the metal rails
are mounted parallel to the socket locking arm.
Both rails are mounted with two screws from
the back side of the motherboard.
1 2
CORRECT: rails parallel to socket
locking arm INCORRECT: rails perpendicular to
socket locking arm
[This section is for CPU-300 models only]
You should temporarily mount the CPU
Cooler at this point. If there are capacitors
around the socket, and they interfere
with the CPU Cooler, the “Spacer” will be
needed.
If the capacitors do not contact the bottom
of the CPU Cooler, the Spacer is not
needed.
Rails
Spacer
Screws
Apply thermal paste to the CPU directly.
Spread the paste so that it evenly covers
the CPU. A piece of thick paper (such as a
business card) works well for this.