Connecting tubes – Koolance RM2-4U User Manual
Page 31
26
Each cooler kit contains clamps to secure
tubing to the cooler’s nozzles. Thread a
clamp onto each tube before connecting it to
the cooler nozzle.
Attach by squeezing the tube while pushing
firmly over the nozzle. The tubing should
completely cover the nozzle.
If you are finding it difficult to connect some
tubes (such as to the CPU cooler), try
temporarily stretching-out the tube end by
inserting need-nose pliers.
Connecting Tubes
Continue connecting all of your
coolers in the system until there
are no longer any open tube ends.
Connecting Exos Systems