INFICON VGC401 Single-Channel Controller - Manual (Page 84)

84
tinb01e1-f (2011-07) VGC401.om
In the following instructions, the index is used instead
of the actual index.
n
Unpack the self extracting file *.exe or the packed
file *.zip.
o
If you have not connected the VGC401 to the
COM1 interface:
Open the batch file *.bat …
… edit the interface …
… and save the new setting.
p
Start batch file *.bat.
Ö
The new firmware is transmitted to the VGC401.
Program transfer