INFICON VGC401 Single-Channel Controller - Manual (Page 72)

72
tinb01e1-f (2011-07) VGC401.om
Transmit: LOC [,x] []
│
└─ x = 0 –> off (default)
1 –> on
Receive:
Transmit:
Receive: x
│
└─ Parameter setup lock status
Transmit: TRA []
Receive:
Transmit:
Starts the test (duration <1 s)
Receive: xxxx
│
└─ ERROR word
Transmit: TEP []
Receive:
Transmit:
Starts the test (duration ≈10 s)
Receive: xxxx,xxxx
│ │
│ └─ Check sum (hex)
│
└─ ERROR word
Transmit: TEE []
Receive:
Transmit:
Starts the test (duration <1 s)
Do not keep repeating the test (EEPROM life).
Receive: xxxx
│
└─ ERROR word
Parameter setup lock
RAM test
EPROM test
EEPROM test