INFICON VGC401 Single-Channel Controller - Manual (Page 49)

tinb01e1-f (2011-07) VGC401.om
49
para
Ö Start test program.
Press keys >5 s
(
→ 28)
or
turn the unit off, wait for 10 s
and then turn it on again.
The firmware version (program version) is displayed.
Version
Ö The two parts of the firmware
number are displayed alter-
nately.
│
The last character indicates the modifi-
cation index (-, A … Z). Please mention
this index when contacting INFICON in
the event of a fault.
Behavior of the system control (watchdog) in the event of
an error.
Setting
Ö The system automatically ac-
knowledges error messages of
the watchdog after 2 s.
Ö Error messages of the watch-
dog have to be acknowledged
by the operator.
Starting the test
program
Changing to the
Measurement mode
4.6.1 Parameters
Firmware version
Watchdog control