beautypg.com

3 mains power connector – INFICON VGC401 Single-Channel Controller User Manual

Page 20

background image

20

tinb01e1-f (2011-07) VGC401.om

DANGER

DANGER: line voltage
Incorrectly grounded products can be ex-
tremely hazardous in the event of a fault.
Use only a 3-conductor power cable
(3×1.5 mm

2

) with protective ground. The

power connector may only be plugged into a
socket with a protective ground. The protect-
tion must not be nullified by an extension
cable without protective ground.


The unit is supplied with a 2.5 m power cord. If the mains
cable is not compatible with your system, use your own,
suitable cable with protective ground.

The socket must be fuse-
protected with 10 A

max

Disconnecting device

acc. to EN 61010-1


If the unit is installed in a switch cabinet, the mains volt-
age should be supplied and turned on via a central
power distributor.

3.3 Mains Power

Connector