HYDAC HMGWIN 3000 - Manual (Page 11)

HMGWIN 3000 English Page 11
Edition 06/2007 – V02 R01
3 Using HMGWIN
Note
:
All options can only be selected using the mouse.
3.1 Viewing actual measured values of the HMG 3000 in HMGWIN 3000
• To view actual measured values of the HMG
Click on the “HMG 3000” dialogue box.
“HMG 3000” opens in a new window.
Click on “Current measured values” on the left hand side of the window.
The measured values of all active channels of the HMG 3000 appear on the
right.
Click on “Smaller” to display the measured values in a smaller size.
Click on “Larger” to display the measured values in a larger size.
Click on “Colour” to display the measured values in a different colour.
Click on “3D effect” to display the measured values in a 3D effect; click again
to turn the 3D effect off.
Click on “Min/Max” to show the minimum and maximum values of the individ-
ual sensors shown; click again to hide these again.
Close the “HMG 3000” window to continue working with “HMGWIN 3000”.
3.2 Retrieving a Measurement Curve
There are three ways of doing this:
You can import a measurement curve from your HMG 3000 into HMGWIN 3000, open a
saved file, or retrieve a file that is already open.
3.2.1 Retrieving (and Deleting) a File from the HMG 3000 in HMGWIN 3000
• Opening a file from the HMG 3000:
Click on the “HMG 3000” dialogue box.
“HMG 3000” opens in a new window.
Click on “Recordings” on the left hand side of the window.
All of the recordings stored in the HMG 3000 are shown on the right.
Select one or more recordings in the list
Click on “Open” in the line under the recordings.
All of the recordings selected are opened in HMGWIN 3000, the file opened
last is shown in the display window and the others in the left hand column as
"Recording x"
(x = sequential number).
Close the “HMG 3000” window.
Now you can work with the recording (see “3.3” ff)
The recording can be saved afterwards (see “3.6.2 Save” and “3.6.3 Save
As“
).
• Saving an HMG 3000 file directly in HMGWIN 3000
Click on the “HMG 3000” dialogue box.
“HMG 3000” opens in a new window.
Click on “Recordings“ on the left hand side of the window.
All of the recordings stored in the HMG 3000 are shown on the right.