HMC Electronics ES1696 Chemtronics No Clean Plus Flux Remover, Flux-Off User Manual
Page 2
Material Compatibility
ABS Non-Compatible
Buna-N Non-Compatible
EPDM Excellent
Graphite Excellent
HDPE Excellent
LDPE Good
Lexan
™
Non-Compatible
Neoprene Fair
Noryl
®
Non-Compatible
Nylon
™ 66
Excellent
Cross-Linked PE
Excellent
Polypropylene Excellent
Polystyrene Non-Compatible
PVC Non-Compatible
Silicone Rubber
Non-Compatible
Teflon
™
Excellent
Viton
™
Non-Compatible
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6” from surface to clean. Wash parts
from top to bottom, allowing the liquid to
flush away flux residue. Flux-Off
®
No Clean
“Plus” can be used to remove all types of
fluxes in an ultrasonic cleaner.
AVAILABILITY
ES1696 12 oz. Aerosol
ES896B 8 oz. BrushClean
™ System
ES196
1 Gal. Liquid
TECHNICAL & APPLICATION
ASSISTANCE
ITW Chemtronics
®
provides a technical
hotline to answer your technical and
application related questions. The toll free
number is: 1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC
0.0%
VOC
51%
HCFC-141b
HCFC-225
0.0%
0.0%
HFC
nPB
0.0%
0.0%
CFC, HCFC-225, HCFC-141b, VOC, HFC, and nPB
percentages shown are the content by weight.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly. ITW
CHEMTRONICS
®
does not guarantee the accuracy
of the data and assumes no liability in connection
with damages incurred while using it.
MANUFACTURED BY:
ITW CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. B (06/06)
DISTRIBUTED BY:
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440