HMC Electronics ES1696 Chemtronics No Clean Plus Flux Remover, Flux-Off - Manual

PRODUCT DESCRIPTION
Flux-Off
®
No Clean “Plus” Flux Remover is
an extra strength solvent that removes heavy
and encrusted flux deposits. This high
pressure aerosol or bulk liquid penetrates
quickly to remove all types of flux, oxide
particles, dust, grease and oil, then evaporates
quickly leaving no residues.
Powerful cleaner removes R, RA, RMA,
and No Clean fluxes
Non-corrosive, safe for metals
Flammable
Extra-strength
Fast drying
Removes encrusted, baked-on fluxes
All-Way Spray valve - even sprays upside
down
Available with BrushClean ™ System
TYPICAL APPLICATIONS
Flux-Off
®
No Clean “Plus” Flux Remover
effectively cleans flux residues from:
Chip Carriers
Heat Sinks
Metal Housings and Chassis
Printed Circuit Boards
Plugs
Relays and Contacts
Sockets
Surface Mount Device Pads
Solenoids
Switches
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Flash Point
-20
°F
Evaporation Rate >1
(butyl acetate=1)
Specific Gravity 0.706
Appearance Clear, Colorless Liquid
Odor Ethereal
Solubility in Water Negligible
Kauri-Butanol
(KB) Number
86
Shelflife 5 years
RoHS/WEEE
Status
COMPATIBILITY
Flux-Off
®
No Clean “Plus” Flux Remover,
like any cleaner, should be tested on a non-
critical area to determine plastics
compatibility prior to use. Not recommended
for ABS, acrylics, polycarbonates,
polystyrenes and PVC.
TDS # 1696
CHEMTRONICS
®
Technical Data Sheet
Flux-Off
®
No Clean “Plus”
Flux Remover
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440