Heidolph VAC control automatic - Manual (Page 67)

67
E
VAC control automatic
feature value
range 1400 - 1 mbar
resolution 1 mbar
accuracy 0,5% f.s.
materials in touch with media ceramics, PP, Viton
measuring cycles 20 ms
operating temperature 0 ... 40°C
storage temperature -10 ... +50°C
power supply 90 - 260 VAC 50/60 Hz
dissipated power max. 13 W
switching outputs 24 VDC, max. 5W
terminal for vacuum hose shaft, 9 mm
terminal for aeration hose shaft 4mm
state of aeration valve powerless open
display LED 13mm
size 145x85x50(85) mm
weight 550g
WARRANTY, LIABILITY & COPYRIGHT
Warranty
Heidolph Instruments provides a three-year warranty on the products described here (with the
exception of glass and consumable parts) if registered with enclosed warranty card or via internet
(www.heidolph.com). Warranty starts with the date of registration. Without registration warranty
starts according to serial number. This warranty covers defects in materials and workmanship.
Transit damage is excluded from this warranty.
To file for such warranty service, contact Heidolph Instruments (phone ++49-9122-9920-68) or
your local Heidolph Instruments Dealer. If defects in material or workmanship are found, your item
will be repaired or replaced at no charge.
Misuse, abuse, neglect or improper installation are not covered by this warranty.
Alterations to the prese
nt warranty need Heidolph Instruments’ consent in writing.
Exclusion Clause
Heidolph Instruments cannot be held liable for damage from improper use or misuse. Remedy for
consequential damage is excluded.
Copyright
Copyright in pictures and wording of the present Instruction Manual is held by Heidolph
Instruments.