2 interfaces for the x series, 1 100mbps tp interface – GeoDesy Pronto X Series User Manual
Page 8
GeoDesy Kft.
8
E-mail: [email protected]
H-1116 Budapest, Kondorfa str. 6-8. Telefon: 06-1-481-2050
Fax.: 06-1-481-2049
2 Interfaces for the X Series
2.1 100Mbps TP interface
The
GeoDesy FSO
X PoE
series products are designed to provide easy-to-use
and cost-effective solution for interconnecting Local Area Networks. By utilizing
standard Category 5 cable and using standard IEEE802.3af interface the
deployment of the system is easier than ever before. The transparent and wire
speed data transfer together with virtually zero latency assures the easy integration
of the system in all environments.
The
X PoE
systems should be considered as repeaters in the network. So the
installation distance between the head and the network device is 100m. The
distance on a back to back site is maximum 5 meters, between the heads without
signal regeneration.
The
X PoE
systems connecting to the network with an RJ 45 cable which provides
the power required for operation and the data. The system requires IEEE 802.3af
Power over Ethernet switch or power injector. The power consumption suits to the
standards described in the standard. Also provides fast and easy connection for the
management system for more details please see the chapters below. The system is
certified
Class 1M product
, this way 100% eye safe.