GeoDesy Pronto X Series User Manual
Page 5
GeoDesy Kft.
5
E-mail: [email protected]
H-1116 Budapest, Kondorfa str. 6-8. Telefon: 06-1-481-2050
Fax.: 06-1-481-2049
very hard receiver sensitivity. These two factors combined to provide one of the best
performing
FSO
systems on the market today.
To meet the demands for every higher bandwidth,
GeoDesy FSO
(
Europe)
Limited
continues to invest heavily in research and development with the newest product line
which offers Gigabit speeds being launched.
This manual describes the
GeoDesy FSO
Next
series of free space laser
transmission system.
The
GeoDesy FSO
Next
product range offers cost effective reliable free space
laser transmission for two Mbps up to 1000 Mbps data to the air, where a clean line
of site is available. It delivers the most effective point-to-point connection between
computer networks or telephone exchanges.
No need for installing cables, no rental costs, no licensing requirements.
Ideal for urban areas or city centres, where the use of these lines are expensive.
Suitable for factories or industrial environments where high noise level can interfere
with the transmitted data. The best choice to make a connection across rivers and
other natural or artificial obstacles, where cable is not available.
The transmission technique used in the
GeoDesy FSO
devices provides
transparent and wire-speed data transfer with virtually zero latency. Because they
use infrared light as the transmission medium,
GeoDesy FSO
system do not
require frequency licenses and the transmission is not effected by electro-magnetic
or radio-frequency interference. Basically the
GeoDesy FSO
link can be
considered as a virtual fibre in the air, which ends in real fibre optic cable at both
ends.
Our product is built using high quality components for operation in even the most
adverse conditions.
Metal housing gives robust, waterproof environment for the electronics.
The shield protects the device from direct sunlight and provides extra air isolation.
The
GeoDesy FSO
X systems comprise two laser-heads and the two indoor
interconnection units (OIU) - one at each end. The interface connections are housed
in the outdoor unit together with the PSU of the system.
Best practises were employed in cost engineering throughout the development of
GeoDesy FSO
.