GeoDesy Pronto X Series - Manual (Page 12)

GeoDesy Kft. 12 E-mail: [email protected]
http://www.geodesy-fso.com
H-1116 Budapest, Kondorfa str. 6-8. Telefon: 06-1-481-2050
Fax.: 06-1-481-2049
Type
: LB PX1000-E100TP/AF
S/N : LBH-«s/n»
Input Power : -48VDC IEEE 802.3af compilant
Laser : 1M
Wavelength : 785nm
Manufactured by: GeoDesy FSO 1162 Budapest,
Kondorfa u. 6-8, HUNGARY, Tel.:+36-1-453-7440 Fax.:+36-1-240-3570
www.GeoDesy FSO.com
4 Eye safety
There are no two installation spots of the same kind, the buildings or structures, the
available space and the accessibility of the place will be different in each case.
Nevertheless, as a general rule it is very important to select the installation site so
that nobody can look directly into the transmitter. For this reason place the head
either so high (on the side wall of the building) or so close to the edge of the building
(on a parapet on the rooftop) that no person can approach it accidentally and can
get into the beam path. Set up barriers if necessary and put warning signs at
prominent places.
The laser heads are provided with all labels and hazard warnings required by the
laser standard. There are warning labels on both the left and right side of the
protective cover next to the optical window and there is a warning and an informative
label on the rear side of the laser head.
INVISIBLE LASER RADIATION
DO NOT VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS
CLASS 1M LASER PRODUCT