2 af adjustment method – GeoDesy Pronto X Series User Manual
Page 16
GeoDesy Kft.
16
E-mail: [email protected]
H-1116 Budapest, Kondorfa str. 6-8. Telefon: 06-1-481-2050
Fax.: 06-1-481-2049
6.2 AF adjustment method
What is AF after all? AF stands for Auto Focus.
Geodesy FSO Pinto Next AF
is equipped with the lates innovation from Geodesy. An automatic focusing control
system. The system is capable of changing its beam divergency depending on the
changes of the environment. In the case if the weather gets bad, the system will
decrease the beam size, to concentrate the distributed beam power, to ensure more
stable operation.
IMPORTANT!
Auto focus adjustment does not work if there is no remote level!
Remote connection required for the Auto focus adjustment.
The installation of the
Pinto Next AF
is pretty much the same as the standard
system installation. To make sure that the AF system won’t kick in during the
alignment, ensure that the AF is set to disabled, which is the factory default.
The default settings of the Auto Focus (AF) laser heads is manual mode (disabled).
The factory beam divergence is set for 750m, this way the alignment of the system
will be easy on every installation distance.
Please do not change the setting of the AF laser heads to auto focus when there is
no connection between the two heads.