Barco R9002328 - Manual (Page 99)

RANDOM ACCESS ADJUSTMENT MODE
R5975059A BARCOVISION 708 200498
RANDOM ACCESS ADJUSTMENT MODE
R5975059A BARCOVISION 708 200498 8-22
RANDOM
ACCESS
ADJUSTMENT
MODE
8-22
RANDOM
ACCESS
ADJUSTMENT
MODE
Horizontal Size Adjustment
Push the control disc up or
down to highlight H SIZE on the
Geometry menu and then press
ENTER.
ENTER will select horizontal size adjust-
ment
EXIT returns to random access adjustment
mode menu.
ADJUST returns to operational mode
Adjust the horizontal size by
pushing the control disc to the
right or to the left until the exact
image width is obtained.
Note :
- if the internal # pattern was
selected, this pattern re-
mains on the screen.
- if the genlocked pattern was
selected, the external source will be
displayed.
A bar scale and a number indicator give
a visual indication of the horizontal size
adjustment.
Hint : In order to avoid loss of resolution
in the projected image and to ensure
maximum CRT longevity, do not use an
excessively small horizontal size set-
ting.
EXIT will return to Geometry
Ideal image size
H size too
small
H size too
large
Select with ê or é
then
to return.
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
H SIZE
70
Horizontal Size Adjustment
Push the control disc up or
down to highlight H SIZE on the
Geometry menu and then press
ENTER.
ENTER will select horizontal size adjust-
ment
EXIT returns to random access adjustment
mode menu.
ADJUST returns to operational mode
Adjust the horizontal size by
pushing the control disc to the
right or to the left until the exact
image width is obtained.
Note :
- if the internal # pattern was
selected, this pattern re-
mains on the screen.
- if the genlocked pattern was
selected, the external source will be
displayed.
A bar scale and a number indicator give
a visual indication of the horizontal size
adjustment.
Hint : In order to avoid loss of resolution
in the projected image and to ensure
maximum CRT longevity, do not use an
excessively small horizontal size set-
ting.
EXIT will return to Geometry
Ideal image size
H size too
small
H size too
large
Select with ê or é
then
to return.
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
H SIZE
70