Barco R9002328 - Manual (Page 64)

R5975059A BARCOVISION 708 200498
GUIDED
ADJUSTMENT
MODE
GUIDED ADJUSTMENT MODE
GUIDED
ADJUSTMENT
MODE
GUIDED ADJUSTMENT MODE
R5975059A BARCOVISION 708 200498 7-11 7-11
Vertical Centerline Bow Adjustment
The vertical centerline bow
adjustment corrects for curva-
ture in the horizontal direction
in the middle of the picture for
the vertical lines.
Push the control disc to the left
or to the right to adjust the
vertical centerline bow of the
setup pattern and then press
the ENTER key to continue.
Correct by pushing
the control disc to
the right
Correct by pushing
the control disc to
the left
Vertical Centerline Skew Adjustment
The vertical centerline skew
function corrects for tilting of
the vertical lines in the middle of
the picture.
Push the control disc to the
right or to the left to adjust the
vertical centerline skew of the
setup pattern until this line is
straight. Misalignment of the
outer vertical lines will be cor-
rected with the bow and key-
stone corrections. Press EN-
TER to continue.
Correct by pushing
the control disc to
the right
Correct by pushing
the control disc to
the left
Vertical Centerline Bow Adjustment
The vertical centerline bow
adjustment corrects for curva-
ture in the horizontal direction
in the middle of the picture for
the vertical lines.
Push the control disc to the left
or to the right to adjust the
vertical centerline bow of the
setup pattern and then press
the ENTER key to continue.
Correct by pushing
the control disc to
the right
Correct by pushing
the control disc to
the left
Vertical Centerline Skew Adjustment
The vertical centerline skew
function corrects for tilting of
the vertical lines in the middle of
the picture.
Push the control disc to the
right or to the left to adjust the
vertical centerline skew of the
setup pattern until this line is
straight. Misalignment of the
outer vertical lines will be cor-
rected with the bow and key-
stone corrections. Press EN-
TER to continue.
Correct by pushing
the control disc to
the right
Correct by pushing
the control disc to
the left