Barco R9002328 - Manual (Page 38)

R5975059A BARCOVISION 708 200498
CONTROLLING
CONTROLLING
R5975059A BARCOVISION 708 200498
CONTROLLING
CONTROLLING
5-3 5-3
The BARCOVISION 708 MULTIMEDIA can be controlled with
a. the RCU
b. the hardwired RCU (cable not included)
c. the local keypad.
Controlling the projector with the RCU and the hardwired RCU is the same.
How to use the RCU
a) Point the front of the RCU towards the reflective screen surface
b) Point the front of the RCU towards one of the IR sensors in the projector.
When using the wireless remote control, make sure you are within the effective
operating distance (30m, 100ft in a straight line). The remote control unit will not
function properly if strong light strikes the sensor window or if there are obstacles
between the remote control unit and the projector's IR sensor.
g
Screen
IR sensor
RCU700
The BARCOVISION 708 MULTIMEDIA can be controlled with
a. the RCU
b. the hardwired RCU (cable not included)
c. the local keypad.
Controlling the projector with the RCU and the hardwired RCU is the same.
How to use the RCU
a) Point the front of the RCU towards the reflective screen surface
b) Point the front of the RCU towards one of the IR sensors in the projector.
When using the wireless remote control, make sure you are within the effective
operating distance (30m, 100ft in a straight line). The remote control unit will not
function properly if strong light strikes the sensor window or if there are obstacles
between the remote control unit and the projector's IR sensor.
g
Screen
IR sensor
RCU700