Barco R9002328 - Manual (Page 26)

R5975059A BARCOVISION 708 200498
CONNECTIONS
CONNECTIONS
R5975059A BARCOVISION 708 200498
CONNECTIONS
CONNECTIONS
4-3 4-3
Connecting a Composite Video source.
Composite video signals from a VCR, OFF air signal decoder, etc..
Video input selection :
a. Press digit button 1 on the RCU or
b. with the local keypad :
(to gain access to the local keypad, see Local keypad in chapter Location
and function of control.)
- press ADJUST key, the General access menu is displayed on the screen.Iinput
If a line doubler is built in :
the default position of this line doubler is ON (active), the video input signal
will be displayed as a non interlaced image (= improved image stability).
To enable or to disable this line doubler function, enter the adjustment mode
and change the position of the ON/OFF toggle switch (see Picture tuning
in chapter 'Guided' adjustment mode or 'Random access' adjustment
mode).
TV tuner, e.g. TVDM40 stereo
VCR
Audio amplifier
Composite
video
COMM PORT
(800 peripherals) REMOTE R G(S) B S VIDEO S-VIDEO R-Y Y(S) B-Y RS232 OUT RS232 IN
Connecting a Composite Video source.
Composite video signals from a VCR, OFF air signal decoder, etc..
Video input selection :
a. Press digit button 1 on the RCU or
b. with the local keypad :
(to gain access to the local keypad, see Local keypad in chapter Location
and function of control.)
- press ADJUST key, the General access menu is displayed on the screen.Iinput
If a line doubler is built in :
the default position of this line doubler is ON (active), the video input signal
will be displayed as a non interlaced image (= improved image stability).
To enable or to disable this line doubler function, enter the adjustment mode
and change the position of the ON/OFF toggle switch (see Picture tuning
in chapter 'Guided' adjustment mode or 'Random access' adjustment
mode).
TV tuner, e.g. TVDM40 stereo
VCR
Audio amplifier
Composite
video
COMM PORT
(800 peripherals) REMOTE R G(S) B S VIDEO S-VIDEO R-Y Y(S) B-Y RS232 OUT RS232 IN