Controlling – Barco R9002328 User Manual
Page 42
R5975059A BARCOVISION 708 200498
CONTROLLING
CONTROLLING
R5975059A BARCOVISION 708 200498
CONTROLLING
CONTROLLING
5-7
5-7
Use the control disc to highlight the
desired source number. Push the
control disc up or down to move the
cursor up and down, push the con-
trol disc to the left or to the right to
move the cursor to the left and to the
right.
Press ENTER to confirm your se-
lection.
When a valid and available source
is selected, there will be information
displayed on the screen about that
source. This information includes :
- Source number
- Horizontal frequency
- Vertical frequency
When the entry is a non valid source
number, a warning appears on the
screen : 'input not available'.
GENERAL ACCESS
5
6
3
4
1
2
Enter Adjus
Select with
й , к
з or è
then
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
Source 2
Fh= 15.6 kHz
Fv= 50 Hz
WARNING
input not
available
Use the control disc to highlight the
desired source number. Push the
control disc up or down to move the
cursor up and down, push the con-
trol disc to the left or to the right to
move the cursor to the left and to the
right.
Press ENTER to confirm your se-
lection.
When a valid and available source
is selected, there will be information
displayed on the screen about that
source. This information includes :
- Source number
- Horizontal frequency
- Vertical frequency
When the entry is a non valid source
number, a warning appears on the
screen : 'input not available'.
GENERAL ACCESS
5
6
3
4
1
2
Enter Adjus
Select with
й , к
з or è
then
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
Source 2
Fh= 15.6 kHz
Fv= 50 Hz
WARNING
input not
available